Hydraulic Training Trolley

Model No. HLA70-2

– 2 Working posts
– Dimmensions: 1176 x 860, 1948 mm (high).
– Metal structure with plastic paint covering
– 2 metal working panels of 950×1050 mm each. With ?17 mm holes for working on panel every 50mm (horizontally and vertically) for clamping hydraulic components without using any additional tool.
– 4 wheels, 2 of them are lockable.
– 3 drawers for storing components.
– 1 pressure connection and 2 return connections at working side
– 2 measuring glasses, one for working side
– 2 paper holders for drawings
– 2 emergency buttons to cut down electrical and hydraulic power supply.
– Just one single-phase plug for the hydraulic power unit.
– 30 liters oil, HLP 32
– Big fixed metal tray with plate grid under the panel to collect any eventual leak of oil. Directly connected to the oil deposit of the hydraulic power unit.

HYDRAULIC POWER UNIT:
– Assembled onto the metal structure, under the panel, incorporate shake absorbers to avoid noise.
– 2 internal gear pumps. 5 liters /min each pump. Non immersed into the oil.
– Low noise level
– 2 pressure relief valves, oil level viewfinder, air inlet filter, oil return filter, 2 pressure gauges,
– Oil reservoir 30 liters
– Single–phase electric motor 220 V 50Hz (optionally 110 Vca 50 – 60 Hz), 1.2 Kw
– On-Off control box with two push buttons and motor overload protection.

Every valve size will be NW6 – Cetop 3.
Every hydraulic connection will use anti-leakage quick ecologic connectors.

For more details download catalogue from here